Arduino Nano Cable (USB 2.0 A to USB 2.0 Mini B) - Blue/Black |Nano cable |radiomarket.in

The Arduino Nano board uses a USB Type-B cable for communication and programming with a computer. Here are some technical specifications of the cable:

1. Connector Type: The USB connector type is Type-B, which is a square-shaped connector with beveled corners and two small tabs on the top and bottom of the connector.

2. Cable Length: The standard length of the cable is 1 meter or 3.28 feet. However, there are other lengths available, such as 50 cm, 2 meters, or 6 feet.

3. Data Transfer Rate: The USB 2.0 standard is used for communication and programming with a computer. The data transfer rate can reach up to 480 Mbps (megabits per second).

4. Cable Construction: The cable consists of four wires: two for power (VCC and GND) and two for data (D+ and D-). The wires are typically wrapped in a shielded cable to reduce electromagnetic interference.

5. Connector Material: The connectors on each end of the cable are typically made of molded plastic, with gold-plated contacts for reliable signal transmission.

6. Compatibility: The cable is compatible with any USB Type-A port on a computer or USB hub. It is also compatible with other Arduino boards that use a USB Type-B connector.

Specifications

• Compatible with the PC (USB Type-A to USB Mini-B)
• Length: 30cm
• Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
• Aluminum under mold shielding.
• Foil and braid shield to reduce EMI/FRI interference.

Package Contents:

1× Arduino Nano Cable (Blue/Black)